Auflistung nach Schlagwort "Wear resistance"

Sortiert nach: Sortierung: Ergebnisse:

  • 3D registration of depth data of porous surface coatings based on 3D phase correlation and the trimmed ICP algorithm 
    Loftfield, Nina; Kästner, Markus; Reithmeier, Eduard (Bellingham, Wash. : SPIE, 2017)
    A critical factor of endoprostheses is the quality of the tribological pairing. The objective of this research project is to manufacture stochastically porous aluminum oxide surface coatings with high wear resistance and ...
  • A comparative analysis of ceramic and cemented carbide end mills 
    Dröder, Klaus; Karpuschewski, Bernhard; Uhlmann, Eckart; Arrabiyeh, Peter A.; Berger, Daniel; Busemann, Sarah; Hartig, Jörg; Madanchi, Nadine; Mahlfeld, Georg; Sommerfeld, Christian (Berlin : Springer, 2020)
    Milling of ferrous metals is usually performed by applying cemented carbide tools due to their high hardness, temperature and wear resistance. Recently, ceramic tool materials have been on the rise and enhanced the efficiency ...
  • Characterization of porous surfaces with spatial point pattern analysis 
    Zou, Yibo; Kästner, Markus; Reithmeier, Eduard (Bellingham, Wash. : SPIE, 2015)
    Nowadays thermal plasma spray coating is widespread in automobile industry. For example, in the cylinder manufacturing process coatings are applied for friction reduction, wear and corrosion resistance. After the honing ...
  • Chip formation in machining metal bonded grinding layers 
    Denkena, Berend; Grove, Thilo; Suntharakumaran, Vino (Amsterdam : Elsevier B.V., 2018)
    Gears demand increasingly high quality regarding acoustic emissions, surface roughness and lifetime. Therefore, grinding is often the last step in the process chain of gear manufacturing. Grinding wheel grain sizes of 30 ...
  • Development and analysis of microstructures for the transplantation of thermally sprayed coatings 
    Freiburg, D.; Biermann, D.; Peuker, A.; Kersting, P.; Maier, Hans Jürgen; Möhwald, Kai; Knödler, Patrick; Otten, Maik (Amsterdam : Elsevier, 2014)
    Thermally sprayed coatings and tribological surfaces are a point of interest in many industrial sectors. They are used for better wear resistance of lightweight materials or for oil retention on surfaces. Lightweight ...
  • Microstructure and wear behaviour of high alloyed hot-work tool steels 1.2343 and 1.2367 under thermo-mechanical loading 
    Malik, I.Y.; Lorenz, U.; Chugreev, A.; Behrens, B.-A. (Bristol : Institute of Physics Publishing, 2019)
    Tools and their maintenance costs in hot forging processes account for a considerable proportion of the total components' costs. Forging tools undergo extreme heating and subsequent cooling during the forging process and ...
  • Transfer of ausforming parameters to scaled forging tools 
    Behrens, Bernd-Arno; Brunotte, Kai; Petersen, Tom; Relge, Roman; Till, Michael ([Ostrava-Zabreh] : Tanger Ltd., 2021)
    Forging tools are exposed to cyclically changing thermo-mechanical stress conditions leading to its failure. Damage phenomena on the tool engraving cannot be entirely avoided by hardening the surface, as this leads to a ...
  • Wear Behavior of MoS2 Lubricant Layers during Sheet Metal Forming 
    Behrens, Bernd-Arno; Maier, Hans Jürgen; Hübner, Sven; Bonk, Christian; Almohallami, Amer; Lummer, Christin; Schein, Patrick; Scheland, Hannes; Micke-Camuz, Moritz (London : Elsevier Ltd., 2017)
    The increased use of high and ultra-high strength steel and materials with a high adhesion tendency leads to higher demands regarding the wear resistance of forming tools. A promising approach addressing both challenges ...